Whitby
and Chandler Ltd.
PRODUCT
SPECIFICATION SHEET MATERIAL : SCC 1120
TEST METHOD ASTM F 104 - 89
|
|
Whitby
and Chandler Ltd.
|
|
|
PRODUCT
SPECIFICATION SHEET MATERIAL : SCC 1120
|
||
| BINDERS | Nitrile / Neoprene Rubber | |
| GRANULE
SIZE |
18 / 35 U.S. Mesh | |
| PHYSICAL CHARACTERISTICS | ||
| Hardness Shore "A" (degs) | 60 - 80 | |
| Specific Gravity | 0.700 - 0.800 | |
| Density Kg / cu m | 700 - 800 | |
| Lbs / cu ft | 43.8 - 50 | |
| Compressibility at 400 psi (28 kg/sq.cm) (%) | 25 - 40 | |
| Recovery (min) (%) | 80 | |
| Tensile Strength (min) psi | 285.0 | |
| kg/sq.cm | 20 | |
| Maximum Working Temperature ( degs C) | 120 | |
| FLEXIBILITY | ||
| Original (F-5) | No Cracks | |
| Oven Aged 70 hrs at 212 degs F (100 C) (F=16) | No Cracks | |
| ASTM No. 1 Oil 70 hrs at 212 degs F (100 C) (F=16) | No Cracks | |
| VOLUME CHANGE AFTER OIL IMMERSION | ||
| ASTM No. 1 Oil 70 hrs at 212 degs F (100 C) | -5 to + 15 | |
| ASTM No. 3 Oil 70 hrs at 212 degs F (100 C) | 0 to + 20 | |
| ASTM Fuel A, 22 hrs at R.T. | 0 to + 10 | |
| COMPRESSION SET | ||
| Method A -- 22 hrs at 150 degs F (70 degs) Max | 40 | |
|
TEST METHOD ASTM F 104 - 89 |
||
| LINE CALL OUT ASTM F 104 (F226000 - M299) | ||
| GENERAL INFORMATION AND APPLICATIONS. A medium density, high quality, gasketing material designed specifically to meet the demands of sealing against Transformer Oils. Its blend of Nitrile and Neoprene binders give an excellent balance between Ozone resistance and compatibility with BS 148 Mineral Oil, Midel 7131 and Silicone oils. Available in roll form in order to minimise waste and to facilitate large gaskets without splice or scarf joints. | ||
 |
Whitby
and Chandler Ltd.
Green Road, Penistone, Sheffield, S36 6PH Tel: +44 1226370380 Fax:+44 1226767138 E mail enquiries@whitby-chandler.co.uk |
 |